Not every homeowner needs the most expensive siding system available. Many are looking for a dependable, attractive exterior that fits the architecture of the home, requires minimal upkeep and stays within a responsible remodeling budget.

Gentek Concord vinyl siding fits naturally into that conversation. Its traditional profiles, light roughsawn texture, coordinated color system and .042-inch nominal thickness give contractors a versatile product for remodeling, replacement siding and selected new-construction projects.

Concord is particularly useful when a contractor wants to offer solid product value while preserving room in the homeowner’s budget for trim, soffit, fascia, gutters, windows or carefully selected architectural accents.

What Is Gentek Concord?

Concord is Gentek’s quality vinyl siding line, designed around familiar clapboard and Dutch-lap appearances. It provides the traditional character many homeowners want without the recurring scraping, staining or painting associated with wood siding.

Why Contractors Prefer to Sell Concord

• It serves a broad range of homeowners. Concord provides recognizable styling and dependable vinyl performance at a price point that can work for many remodeling budgets.
• The profiles are easy to understand. Contractors can show homeowners the difference between clapboard and Dutch-lap shadow lines without overwhelming them with unnecessary terminology.
• Coordinated colors simplify complete-exterior sales. Compatible siding, soffit, fascia, trim and rainware help the contractor present the exterior as one visual system.
• It leaves room for meaningful upgrades. A practical primary siding selection can preserve budget for window surrounds, wider corner posts, specialty gables, soffit, fascia or gutter improvements.
• The warranty strengthens the value conversation. Gentek describes Concord as carrying a lifetime limited, non-prorated, transferable warranty with hail protection and lifetime fade coverage, subject to the written warranty’s terms and limitations.

Why Contractors Prefer to Install Concord

Concord uses familiar horizontal vinyl siding profiles, making it a practical system for trained crews. Its manageable panel format can support efficient production when the wall is properly prepared and the crew follows the approved installation sequence.

Concord Installation Priorities

A familiar product still requires disciplined installation. Vinyl siding is a water-shedding exterior cladding, not the primary water-resistive barrier, and it must remain free to move as temperatures change.

1. 1. Prepare a flat, code-compliant wall

   Repair damaged sheathing and correct significant wall irregularities before installation. Confirm the required water-resistive barrier and flashing details around all openings and penetrations.

2. 2. Establish a level starter course

   Measure from the soffit and other visual reference points before snapping the starting line. A small error at the bottom becomes more noticeable as the installation moves up the wall.

3. 3. Fasten through the designated slots

   Use approved corrosion-resistant fasteners of the proper length and head size. Fasten into an approved substrate according to Gentek’s instructions and the applicable wind-load design.

4. 4. Do not nail the panels tightly

   Leave the manufacturer-required space between the fastener head and nailing hem. The panel should be secure while remaining free to move laterally.

5. 5. Maintain required clearances

   Follow Gentek’s temperature-based clearance requirements at corner posts, channels and other receiving accessories. Never force a panel tightly between trim pieces.

6. 6. Fully engage every course

   Lock each panel along its full length before fastening it. Avoid stretching panels upward, which can distort the profile and restrict natural movement.

7. 7. Plan laps away from primary sightlines

   Stagger laps and orient them to reduce visibility from entrances, driveways and frequently used approaches. Follow the manufacturer’s minimum overlap requirements.

VSI, ASTM and Manufacturer Specifications

Standards provide a performance framework, but they do not replace the product-specific installation instructions, local code requirements or the project’s engineered wind-load design.

How to Use HOVER to Build Larger Concord Contracts

HOVER can convert property photographs into a measured, customizable 3D model. Contractors can use that model to move beyond a basic siding price and show how Concord works as part of a coordinated exterior.

A Practical Good-Better-Best Presentation

A Soft Way to Present the Larger Project

“Concord gives us a clean, dependable starting point for the exterior. I also prepared two versions showing what happens when we coordinate the trim, soffit and front gable. The additional work is optional, but seeing everything on your home makes it easier to decide which improvements are worth including now.”

This keeps the conversation helpful. The homeowner sees the base project, understands the optional improvements and can compare the investment without feeling pushed.

Concord Pre-Order Checklist

• Confirm the selected Concord profile and current color availability.
• Review the latest Gentek installation instructions and written warranty.
• Verify local code, wall assembly and wind-load requirements.
• Field-check all HOVER measurements that affect ordering or fabrication.
• Include starter, corners, channels, blocks and finishing accessories.
• Separate required work from optional design improvements in the estimate.
• Obtain final color approval using current physical product samples.
• Document installation and provide applicable warranty information.